-
SKU: 24862
OIL DRAINER & FLUID EXTRACTOR 21GAL
The OEMTOOLS 21 Gallon Oil Drain Vacuum and Extractor is designed for the collection of used fluids including motor oil, transmission fluid, and coolant from under lift-mounted vehicles, or by evacuation directly from fluid reservoirs or through dipstick tubes. The portable oil drain system is designed to safely capture oil and other vehicle fluids with the use of a large funnel or vacuum.
Discharge Hose Length: 82″
Funnel Diameter: 15″
Funnel Extension Adapter: 22″
Funnel Height Adjustment: 45″ – 62″
External Air supply is Required
Includes 4 Extraction Tubes: 3/8″ x 400 mm, 6 mm x 760 mm, 7 mm x 900 mm, 6 mm x 600 mm -
SKU: 27212
MANUAL BUSHING INSTALLATION & REMOVAL SET
Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals. Allows the technician to service a wide range of bushings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, etc.
Reduces the Possibility of Damaging the Bearing/Suspension Housings
Supplied with 4 Stepped End Plates and 4 Force Screws in Carry-Case
Plates and Sleeves Can Also Be Used in a Standard Workshop Press When On-Site Access is Not Possible
Comes with 20 Cups and Receivers for 100s of Combinations
Sleeve Wall Thickness: 5 mm; Sleeve Height: 94 mm
External Sleeve Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm
Sleeve End Caps: 83 x 20 mm
4 ACME Threaded Forcing Screws: 10 X 1.5, 12 X 2.0, 14 X 2.0, 16 X 2.5 mm
Force Screw Length: 450 mm
Includes Adapter to Use Bushings with Shop Press -
SKU: 24481
IMPACT WRENCH CORDLESS 20V LITH-ION
Heavy Duty 1/2″ Drive Li-ion Impact Wrench is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance and other applications. Rubber, ergonomic grip adds comfort and reduces fatigue. The 20V Max.* Li-ion battery gives you more torque power and longer battery life.
Anvil: 1/2″ Drive
2 Speed Transmission: 0-2200 RPM and 0-2900 IPM
Nut Busting Torque: 300 Ft/Lb.
Tightening Torque: 260 Ft/Lb.
Includes 4.0 Ah Li-ion Rechargeable Battery with Charging Station
Weight: 8 Lb.
4 Battery Charge Indicators: 100% (4), 75% (3), 50% (2) and 25% (1)
Includes Li-ion Battery with Charging Station
Spare Battery Part Number: 27314A -
SKU: 27065
TESTER RADIATOR PRESSURE
Chrome Plated Pressure Pump for Corrosion Resistance
Includes 3 Popular Radiator Adapters and 1 Cap Adapter
Cap Has a Rotating Lever for Fine Pressure Adjustment and Safe Pressure Release
Comes in a Sturdy Blow Mold Case
Inner Pack 1
Case Pack 6 -
SKU: 24666
IMPACT WRENCH 12DR CORDED HD OEM
IMPACT WRENCH 12DR CORDED HD OEM
Inner Pack 1
Case Pack 5 -
SKU: 22988
BOLT & NUT EXTRACTOR SET SPIRAL TYPE 10PC
BOLT & NUT EXTRACTOR SET SPIRAL TYPE 10PC
Inner Pack 6
Case Pack 48 -
SKU: 24676
VALVE SPRING COMPRESSOR
Lever action provides additional force and stays compressed for easy valve lock removal. The open design adapters allow better accessibility to valve keepers. Wide reach frame works with a variety of cylinder head configurations.
Lever Action Provides Additional Force and Stays Compressed for Easy Valve Lock Removal
Adapters (Included) Fit Retainer Diameters from 1″ (25mm) to 1-3/16″ (30mm)
Compressor Range from 1-3/8″ to 5-5/8″ (35 mm to 142 mm) -
SKU: 27119
BEARING & SEAL RACE INSTALLER OEM
BEARING & SEAL RACE INSTALLER OEM
Inner Pack 1
Case Pack 6 -
SKU: 25246
RATCHETING HOSE CLAMP PLIER
The OEMTOOLS Hose Clamp Pliers will remove and install flat band spring style hose clamps with diameters of 11/16″ to 2-1/2″ (18 mm – 63.5 mm). The extra reach and locking feature frees hands for faster and easier jobs. Flexible cable design for access to difficult to reach clamps.
Flexible Cable Design for Access to Difficult to Reach Clamps
Multi Position Lock Hold Clamps Open for Hands Free Operation
Engineered For Maximum Strength -
SKU: 22967
BOLT & NUT EXTRACTOR SET 9PC
BOLT & NUT EXTRACTOR SET 9PC
Inner Pack 6
Case Pack 48 -
SKU: 24664
ROTARY TOOL W/35PC ACC SET
ROTARY TOOL W/35PC ACC SET
Inner Pack 1
Case Pack 6 -
SKU: 25041
ENGINE CYLINDER HONE 3 STONE
The OEMTOOLS Adjustable Cylinder Hone/Deglazer is designed for fast and accurate deglazing of cylinders. Its powerful arm design keeps the abrasives accurately in line. It features a spring tension adjusting nut for positive cutting action at all speeds and smooth glaze-breaking capacity. Easily operated with any standard 1/4″ – 1/2″ drill.
Range: 2″ to 7″ (51 mm to 128 mm)
Spring Tension Adjusting Nut for Positive Cutting Action at All Speeds
Supplied with 4″ Medium Grit Stones
Use Replacement Stones from OEMTOOLS (2541F, 2541M, 2541C) -
SKU: 251500
FUEL LINE DISCONNECT SET ALUM 4PC
Made with Lightweight Anodized Aluminum
Sizes: 1/4″, 5/16″, 3/8″, 1/2″
Separate Fittings on Fuel Lines, Fuel Filters and Fuel Tank Return Lines
Oil Cooler Line Disconnect Tool Separates Automatic Transmission Oil Cooler Lines on Ford Taurus and Escort with AXOD and ATX Transmissions
Inner Pack 6
Case Pack 48 -
SKU: 25156
FUEL PUMP SPANNER WRENCH
Fuel Pump Module Spanner Wrench removes and installs the fuel pump retaining ring holding the Fuel Pump Module onto the gas tank. The Fuel Pump Module Spanner Wrench is fully adjustable for inside and outside grip.
Fully Adjustable for Inside and Outside Grip
Removes and Installs the Fuel Pump Retaining Ring
Inner Pack 6
Case Pack 48 -
SKU: 26036
BEAD LIFTING TOOL 3PCS SET
The OEMTOOLS 26036 20″ Bead Lifting Tool 3 Pack provides the leverage needed when removing and installing tires. The pry bar features a spoon lever design that engages perfectly with the tire’s bead for effective bead lifting. Use either stand-alone or in conjunction with a tire changer for optimal results. The tool’s heat treated I-beam design provides the durability necessary for the job.
20″ Length provides the leverage necessary for the job
Heat treated for increased strength and durability
Chrome Plated for corrosion protection
Rounded edges to help prevent pinching tubes and damaging tires
For use with any make of tire changer
Perfect for mounting and dismounting tires on passenger vehicles, golf cart, motorcycle, shop equipment, etc.
Includes 3 Tire Irons -
SKU: 45914
PULLER 2 JAW 5TON OEM
PULLER 2 JAW 5TON OEM
Inner Pack 6
Case Pack 24 -
SKU: 25019
TESTER CIRCUIT HD OEM
6, 12, and 24 Volt Systems
Stainless Steel Probe
Heavy Duty 5 Ft. Cord
Heavy Plastic Handle and Insulated Gound Clip
High Intensity LED Bulb for Easy Visibility
Replacement Bulb OEMTOOLS 25888
Inner Pack 6
Case Pack 72 -
SKU: 24985
MANUAL FLUID EXTRACTOR & FILLER
MANUAL FLUID EXTRACTOR & FILLER
Inner Pack 1
Case Pack 1 -
SKU: 87131
OIL FILTER CAP WRENCH 64.5MM
The OEMTOOLS 64.5 mm, 14 Flute Oil Filter Wrench is perfect for removal and replacement of aluminum threaded caps that retain oil filter cartridges. It is perfect for use with Toyota Camry, RAV4, Tacoma, Highlander, Sienna, Tundra and more. It is designed to remove overtightened oil filter housings for easy replacement, and correctly sized to prevent slipping during installation.
64.5 mm with 14 Flutes for 2.0 to 5.7L Engines
Fits All 4 Types of Plastic and Aluminum Filter Cartridge Style Housings on 4 and 6 Cylinder Toyota/Lexus/Scion
Designed for Toyota Camry, RAV4, Tacoma, Highlander, Sienna, Tundra and more
Correctly Sized to Prevent Slipping During Installation
Use Either 3/8″ Square Drive or 27 mm Wrench to Turn -
SKU: 25039
PISTON RING COMP 3 1/2-7IN OEM
Capacity: Fits 3-1/2″ to 7″ Pistons
Height: 3-1/2″
Designed with Double Friction Brake Adjustment and Hardened Tool Ratchet
Constructed of High Grade Sping Steel with 1/4″ Square Drive Adjuster
Beaded Edge Prevents Tool from Entering Cylinder with Pistons
Inner Pack 6
Case Pack 48 -
SKU: 25417
SOCKET SET HEX BIT 1/2DR X 3PCS OEM
SOCKET SET HEX BIT 1/2DR X 3PCS OEM
Inner Pack 1
Case Pack 40 -
SKU: 25202
BALL JOINT SEPERATOR
The OEMTOOLS Ball Joint Separator features heat-treated heavy duty alloy steel and tapered fork wedge ends with 15/16″ opening. A long knurled handle provides positive grip.
Heat-Treated, Heavy Duty Alloy Steel
Tapered Fork End Has a 15/16″ Opening
Knurled Handle
Zinc Plated -
SKU: 25037
PISTON RING COMP 2 1/2-5IN OEM
Capacity: Fits 2-1/2″ to 5″ Pistons
Height: 3-1/2″
Designed with Double Friction Brake Adjustment and Hardened Tool Ratchet
Constructed of High Grade Sping Steel with 1/4″ Square Drive Adjuster
Beaded Edge Prevents Tool from Entering Cylinder with Pistons
Inner Pack 6
Case Pack 48
Shop By Category
- ABRASIVES & BLADES
- ADDITIVES & CLEANERS
- ADHESIVES
- AIR CONDITIONING
- APPAREL
- AUTOMOTIVE TOOLS
- AIR TOOLS AND ACCESSORIES
- APPLIANCES
- BAGS & TABLEWARE
- BATH & BODY
- BATTERIES
- BITS & RETHREADING
- CANDLE
- CLEANING PRODUCTS
- CLEARANCE DEALS
- CASTERS & WHEELS
- CHRISTMAS DECORATIONS
- CLOSEOUTS
- COOLERS
- EASTER
- FRAMES
- FOOD & BEVERAGE
- HAND TOOLS
- HARDWARE
- HOME AND GARDEN
- INFLATABLES
- LIGHTS
- MEDICAL SUPPLIES
- MISCELLANEOUS
- HEALTH & BEAUTY
- NOVELTY BAGS
- PARTY SUPPLIES
- PET SUPPLIES
- POWER AND ELECTRICAL TOOLS
- PPE
- PULLERS
- STATIONARY
- SAFETY EQUIPMENTS
- SHOP EQUIPMENT
- COMING SOON
- TOWELS
- TOYS
- SPECIAL OFFER
- TESTERS
- WELDING
- VALENTINE’S DAY
- CATALOG