-
SKU: NAEHO74
DISINFECTANT SPRAY FRESH LINEN 8OZ
- DISINFECTANT IN SPRAY
- SANITIZING
- Spray Cleaner
- Clean home
- Antiviral
Inner Pack 12
Case Pack 12
-
SKU: 24862
OIL DRAINER & FLUID EXTRACTOR 21GAL
The OEMTOOLS 21 Gallon Oil Drain Vacuum and Extractor is designed for the collection of used fluids including motor oil, transmission fluid, and coolant from under lift-mounted vehicles, or by evacuation directly from fluid reservoirs or through dipstick tubes. The portable oil drain system is designed to safely capture oil and other vehicle fluids with the use of a large funnel or vacuum.
Discharge Hose Length: 82″
Funnel Diameter: 15″
Funnel Extension Adapter: 22″
Funnel Height Adjustment: 45″ – 62″
External Air supply is Required
Includes 4 Extraction Tubes: 3/8″ x 400 mm, 6 mm x 760 mm, 7 mm x 900 mm, 6 mm x 600 mm -
SKU: 25071
REAR DISC BRAKE PISTON CUBE
The OEMTOOLS Rear Disc Brake Piston is a must for replacing most rear disc brakes. It rotates pistons back into brake calipers when changing brake pads. A unique “cube” design provides five drive pin configurations to fit most applications.
For Use with 3/8″ Drive Tool
Rotates and Depresses Caliper Pistons Back into Caliper When Changing Brake Pads
Unique Cube Design Provides 5 Drive Pin Configurations to Fit Most Applications
Helps Remove and Install Disc Brake Pistons
Re-aligns Piston Slots (Where aApplicable) to Back of Brake Pad -
SKU: 27212
MANUAL BUSHING INSTALLATION & REMOVAL SET
Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals. Allows the technician to service a wide range of bushings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, etc.
Reduces the Possibility of Damaging the Bearing/Suspension Housings
Supplied with 4 Stepped End Plates and 4 Force Screws in Carry-Case
Plates and Sleeves Can Also Be Used in a Standard Workshop Press When On-Site Access is Not Possible
Comes with 20 Cups and Receivers for 100s of Combinations
Sleeve Wall Thickness: 5 mm; Sleeve Height: 94 mm
External Sleeve Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm
Sleeve End Caps: 83 x 20 mm
4 ACME Threaded Forcing Screws: 10 X 1.5, 12 X 2.0, 14 X 2.0, 16 X 2.5 mm
Force Screw Length: 450 mm
Includes Adapter to Use Bushings with Shop Press -
SKU: 25246
RATCHETING HOSE CLAMP PLIER
The OEMTOOLS Hose Clamp Pliers will remove and install flat band spring style hose clamps with diameters of 11/16″ to 2-1/2″ (18 mm – 63.5 mm). The extra reach and locking feature frees hands for faster and easier jobs. Flexible cable design for access to difficult to reach clamps.
Flexible Cable Design for Access to Difficult to Reach Clamps
Multi Position Lock Hold Clamps Open for Hands Free Operation
Engineered For Maximum Strength -
SKU: 25238
BRAKE SPOON IMPORT
The OEMTOOLS brake adjusting tool adjusts the ratcheting mechanism through the slot in the backing plate on conventional brake shoe fitted vehicles. It allows you adjust brakes without removing the drum or even the wheel. This precision-made tool works well on most imported vehicles and improve responsiveness of brakes if the self-adjuster no longer functions due to dirt or rust. Its compact design makes it perfect for working in tight spaces. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion
Adjust Brakes without Removing the Drum or Wheel
Works Well on Imported Cars
Compact Design Makes it Perfect for Working in Tight Spaces
Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion -
SKU: 25202
BALL JOINT SEPERATOR
The OEMTOOLS Ball Joint Separator features heat-treated heavy duty alloy steel and tapered fork wedge ends with 15/16″ opening. A long knurled handle provides positive grip.
Heat-Treated, Heavy Duty Alloy Steel
Tapered Fork End Has a 15/16″ Opening
Knurled Handle
Zinc Plated -
SKU: 24481
IMPACT WRENCH CORDLESS 20V LITH-ION
Heavy Duty 1/2″ Drive Li-ion Impact Wrench is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance and other applications. Rubber, ergonomic grip adds comfort and reduces fatigue. The 20V Max.* Li-ion battery gives you more torque power and longer battery life.
Anvil: 1/2″ Drive
2 Speed Transmission: 0-2200 RPM and 0-2900 IPM
Nut Busting Torque: 300 Ft/Lb.
Tightening Torque: 260 Ft/Lb.
Includes 4.0 Ah Li-ion Rechargeable Battery with Charging Station
Weight: 8 Lb.
4 Battery Charge Indicators: 100% (4), 75% (3), 50% (2) and 25% (1)
Includes Li-ion Battery with Charging Station
Spare Battery Part Number: 27314A -
SKU: 87131
OIL FILTER CAP WRENCH 64.5MM
The OEMTOOLS 64.5 mm, 14 Flute Oil Filter Wrench is perfect for removal and replacement of aluminum threaded caps that retain oil filter cartridges. It is perfect for use with Toyota Camry, RAV4, Tacoma, Highlander, Sienna, Tundra and more. It is designed to remove overtightened oil filter housings for easy replacement, and correctly sized to prevent slipping during installation.
64.5 mm with 14 Flutes for 2.0 to 5.7L Engines
Fits All 4 Types of Plastic and Aluminum Filter Cartridge Style Housings on 4 and 6 Cylinder Toyota/Lexus/Scion
Designed for Toyota Camry, RAV4, Tacoma, Highlander, Sienna, Tundra and more
Correctly Sized to Prevent Slipping During Installation
Use Either 3/8″ Square Drive or 27 mm Wrench to Turn -
SKU: 25076
SMALL SWIVEL FILTER WRENCH
The OEMTOOLS Small Swivel Oil Filter Wrench fits filters 2-3/4 to 3-1/4″ (69 mm to 82 mm) and features Webb Lock with 3 sets of grippers to hold the filter securely in place. The swivel handle makes it easy to turn in tight spots or hard-to-reach places.
Fits Filters 2-3/4″ to 3-1/4″ (70 mm to 82 mm)
Features Webb Lock? with 3 Sets of Grippers to Hold Filter Accurately in Place
1″ Wide Steel Band for a Strong Grip
Grippers in Band Bite for Non-Slip Removal
Comfortable Vinyl-Coated Handle -
SKU: 24676
VALVE SPRING COMPRESSOR
Lever action provides additional force and stays compressed for easy valve lock removal. The open design adapters allow better accessibility to valve keepers. Wide reach frame works with a variety of cylinder head configurations.
Lever Action Provides Additional Force and Stays Compressed for Easy Valve Lock Removal
Adapters (Included) Fit Retainer Diameters from 1″ (25mm) to 1-3/16″ (30mm)
Compressor Range from 1-3/8″ to 5-5/8″ (35 mm to 142 mm) -
SKU: 2541M
ENGINE STONE HONE REPLACEMENT MEDIUM
Inner Pack 12
Case Pack 48
-
SKU: 71012
VACUUM WET & DRY 3 PEAK HP 8 GALLON
XtremepowerUS 8Gal. stainless steel wet/dry vac is designed to deliver high performance through its 3 HP motor that easily handles tough clean-up tasks. Include accessories (hoses, wands, and accessories) A stainless steel drum construction and caster feet with accessory storage, and you have a wet/dry vac that meets the demands of Pros, DIYers and homeowners
Features:
- Our vacuum can use in dry/wet vacuum also it can be used as the blower to clean the leaf/dust/chipping. Just need connect the wand and the Brush, one start button can start your work!
- Powerful 3 HP provides strong suction and air blow; The vacuum cleaner is equipped with a variety of working accessories to meet various cleaning needs; Our all-in-one multi-surface wet/dry vacuums and accessories are created for power, efficiency and convenience
- HEPA Filtration System Effectively prevent dust particles from remaining in the air, and prevent dust from entering the motor blades, keeping your wet and dry vacuum cleaners running continuously and efficiently
- On Board Accessory storage convenient and space-saving accessories storage method allows you to easily replace accessories as needed for each use
- Produce with pure Copper wire motor, it generate the 1200W strong suction & blow force to apply the clean work, also inside it with the buoy technology double assure the operation safety
Specification:
- Function: Wet / Dry / Blower
- Voltage: 120
- Power: 1200W / 3HP
- Vacuum Capacity: 8Gal
- Max Airflow: 215CFM
- Max Blowing Speed: 230MPH
- Hose Length: 7ft
- Power Cord: 13ft
- Overall Dimension:
- Certification: ,
Package Content:
- Wet Dry Blower Vacuum
- 3pc Extension Bars
- Accessories Set
- Dust Filter Bag
- Storage Kit
-
SKU: 71011
VACUUM WET & DRY 5.5 PEAK HP 5 GALLON
5gal. stainless steel wet/dry vac is designed to deliver high performance through its 5.5 peak HP motor that easily handles tough clean-up tasks. Include accessories (hoses, wands, and accessories) A stainless steel drum construction and caster feet with accessory storage, and you have a wet/dry vac that meets the demands of Pros, DIYers and homeowners
Features:4-layer filtration can filter out dust and collect it in the dust bucket, discharge clean air to prevent secondary pollution. Safety buoy technology will Automatically turn off the power when the water level in the bucket exceeds the boundary to protect the motor better. Wet dry vac equipped with 7 ft. X 1.25-inch resistant premium hose and 3-1.3 FT extension bars to easily clean 20FT diameter areas without move vacuum. Convenience features include comfort grip drum carry handles for easy lifting, large ergonomic top carry handle, large power switch and swivel casters. The tank is made of high-quality stainless steel, no need to worry about rust and damage, Internal uses pure copper motor to assure high performance, maximum power and persistence, increase the service life of 75%. Strong Suction and Various Accessories – Powerful 5.5 HP provides strong suction and air blow, The vacuum cleaner is equipped with a variety of working accessories to meet various cleaning needs, Our all-in-one multi-surface wet/dry vacuums and accessories are created for power, efficiency and convenience
Specification:
- Color: Red/Black
- Function: Wet / Dry / Blower
- Voltage: 120v
- Amp: 8.5
- Power: 1000W (5.5hp Peak)
- Vacuum Capacity: 5Gal
- Max Airflow: 215CFM
- Max Blowing Speed: 230MPH
- Hose Length: 7ft
- Power Cord: 13ft
- Overall Dimension: 14-1/2″(L) x 15″(W) x 18-3/4″(H)
- Certification: Listed
-
SKU: 03088L
WRENCH COMB RATCHET 24MM
WRENCH COMB RATCHET 24MM
Inner Pack 5
Case Pack 60 -
SKU: 03081L
WRENCH COMB RATCHETING 15MM
WRENCH COMB RATCHETING 15MM
Inner Pack 10
Case Pack 100 -
SKU: 45914
PULLER 2 JAW 5TON OEM
PULLER 2 JAW 5TON OEM
Inner Pack 6
Case Pack 24 -
SKU: 45238
BRAKE SPOON IMP SM OEM
BRAKE SPOON IMP SM OEM
Inner Pack 12
Case Pack 72 -
SKU: 45184
DISCONNECT TOOL SET A/C SPRING LOCK OEM
DISCONNECT TOOL SET A/C SPRING LOCK OEM
Inner Pack 6
Case Pack 48 -
SKU: 27119
BEARING & SEAL RACE INSTALLER OEM
BEARING & SEAL RACE INSTALLER OEM
Inner Pack 1
Case Pack 6 -
SKU: 27065
TESTER RADIATOR PRESSURE
Chrome Plated Pressure Pump for Corrosion Resistance
Includes 3 Popular Radiator Adapters and 1 Cap Adapter
Cap Has a Rotating Lever for Fine Pressure Adjustment and Safe Pressure Release
Comes in a Sturdy Blow Mold Case
Inner Pack 1
Case Pack 6 -
SKU: 25843
HOSE END 3/8IN
HOSE END 3/8IN
Inner Pack 12
Case Pack 72 -
SKU: 25417
SOCKET SET HEX BIT 1/2DR X 3PCS OEM
SOCKET SET HEX BIT 1/2DR X 3PCS OEM
Inner Pack 1
Case Pack 40 -
SKU: 25320
OIL FILTER PLIER SM OEM
Slip Joint Handles
2-1/2″ to 4-5/8″ Capacity (63.5 to 117.5 mm)
Jaw Teeth for Sure Grip
20° Jaw Bend for More Applications
Cushioned Handles for Safety and Comfort
Inner Pack 6
Case Pack 36
Shop By Category
- ABRASIVES & BLADES
- ADDITIVES & CLEANERS
- ADHESIVES
- AIR CONDITIONING
- APPAREL
- AUTOMOTIVE TOOLS
- AIR TOOLS AND ACCESSORIES
- APPLIANCES
- BAGS & TABLEWARE
- BATH & BODY
- BATTERIES
- BITS & RETHREADING
- CANDLE
- CLEANING PRODUCTS
- CLEARANCE DEALS
- CASTERS & WHEELS
- CHRISTMAS DECORATIONS
- CLOSEOUTS
- COOLERS
- EASTER
- FRAMES
- FOOD & BEVERAGE
- FURNITURE
- HAND TOOLS
- HARDWARE
- HOME AND GARDEN
- INFLATABLES
- LIGHTERS, MATCHES & BUTANE
- LIGHTS
- MEDICAL SUPPLIES
- MISCELLANEOUS
- HEALTH & BEAUTY
- NOVELTY BAGS
- PARTY SUPPLIES
- PET SUPPLIES
- POWER AND ELECTRICAL TOOLS
- PPE
- PULLERS
- STATIONARY
- SAFETY EQUIPMENTS
- SHOP EQUIPMENT
- COMING SOON
- TOWELS
- TOYS
- SPECIAL OFFER
- TESTERS
- WELDING
- VALENTINE’S DAY
- CATALOG