• SKU: AGCS15A
    CHAINSAW ELECTRIC 18"

    CHAINSAW ELECTRIC 18″

    • Straight Motor Design: Special longitudinal motor design makes the electric chainsaw corded compact and light-weight, providing excellent balance. Easy and free operation switching between left and right hands, to cut the front or side timber more comfortably.
    • 18 Inch Oregon Blade: Practical 18’’ Oregon low kickback bar and chain cuts logs up to 16″ in diameter.
    • Simple Operation: Equipped with a 15A motor for more powerful cuts. The power chainsaw is elastic and can be quickly adjusted.
    • Safety System: Dual safety switch and manual mechanical brake push plate to brake on time to protect your safety. Before starting the chainsaw, make sure that the mechanical brake is released, otherwise chainsaw will not start.
    • Comfortable Design: The soft rubber grip makes the grip more comfortable and the cushioning effect is superior. The corded electric chainsaw body is light.
    • Appliance: Suitable for gardens, firewood, light branches and wooden finishes.

    Package Contents

    1 x Chainsaw
    1 x Chain
    1 x User Manual

    Material: ABS, Steel
    Colour: Orange, Black
    Voltage: 120V~60Hz
    Amps: 15A
    Output Power: 1800W
    Bar Length: 18 inch (45.5 cm)
    Chain: Oregon 91PX063X (18″)
    Bar: Oregon 180SDEA04 (18″)
    Chain Speed: 14 m/s
    Oil Tank Capacity: 140 ml
    Chain Pitch: 3/8 inch (9.68 mm)
    Number of Chain Links: 63

  • SKU: TR2541M
    ENGINE STONE HONE REPLACEMENT MEDIUM
  • SKU: 22895
    SPARK PLUG SOCKET 14MM X 38DR THIN WALL

    SPARK PLUG SOCKET 14MM X 38DR THIN WALL

    he OEMTOOLS 3/8 Inch Drive Extra Thin Wall Spark Plug Socket (14 mm) is designed with thinner walls for spark plugs in tight spaces, found on BMW 3.0L (2007 and newer), Mini and Nissan vehicles. This spark plug socket features a rubber retaining ring to hold the spark plug securely in place during Installation and removal.
    Designed for Spark Plugs Found on BMW 3.0L (2007 & Later), Mini and Nissan
    Rubber Retaining Ring Holds the Spark Plug Securely in Place During Installation and Removal
    Socket Wall is Only 0.25 mm Thick (14.5 mm O.D.) for Spark Plugs in Tight Spaces
    Constructed with Durable Chrome Vanadium Steel
    Inner Pack 10
    Case Pack 250

  • SKU: 5985005
    VACUUM 6 GALLON 3.5HP WET/DRY

    VACUUM 6 GALLON 3.5HP WET/DRY

    Features
    3 in 1 Wet/Dry use/Blower
    Tool and power cord storage
    Easy roll casters
    Top carry handle
    Accessory
    Dia1.25?/32mm x 7ft/2.1m hose
    2.1m/7ft power cord
    Utility wet and dry nozzle
    Extension wands x 3
    Dust bag
    Foam sleeve
    Large cartridge filter
    Inner Pack 1
    Case Pack 1

  • SKU: 5914411
    VACUUM 4 GALLON 5.5HP WET/DRY

    VACUUM 4 GALLON 5.5HP WET/DRY

    Features
    3 in 1 Wet/Dry use/Blower
    Compact design & lightweight
    Wall mountable
    Tool holder
    Accessory
    Dia1.25?/32mm x 3.5ft/1.06m hose
    6.7ft/2m power cord
    Gulper nozzle
    Multi purpose floor nozzle
    Extension wands x 2
    Crevice tool
    Dust bag
    Foam sleeve
    Small cartridge filter
    Wall mount bracket
    Inner Pack 1
    Case Pack 1

  • SKU: MLD01
    ELECTRIC HEIGHT ADJUSTABLE STANDING DESK 48X24"

    ELECTRIC HEIGHT ADJUSTABLE STANDING DESK 48X24″

    . THREE-STEP SUPER EASY INSTALL: The stand up desk is pre-assembled in the package. You only need to install the table legs and the steel pipes on both sides (first step), install the desktop (second step), install the buttons and connect the cables to use(third step).
    • WHOLE PIECE TABLETOP: The 48” x 24” electric desk whole piece desktop provides a large and smooth surface area, no gaps and cracks, suitable for placing various monitors and laptops, which can bring you a comfortable experience for work, study and surfing.
    •  SMOOTH ADJUSTABLE: Through the height adjustment button, you can enjoy the height range of 26.5″ to 45.5″ to transition from sitting to standing. The lifting process of the sit stand desk is stable, smooth and quiet (≤50dB).
    • STABLE STRUCTURE: The all-steel frame and solid particleboard table top allow the stand up desk to bear 154 lbs( max 176lbs). There are reserved holes and nuts on the back of the desktop to more tighten the screw and avoid shaking.
    • THREE-STEP SUPER EASY INSTALL: The stand up desk is pre-assembled in the package. You only need to install the table legs and the steel pipes on both sides (first step), install the desktop (second step), install the buttons and connect the cables to use(third step).

    Case Pack 1 Inner Pack 1

  • SKU: 9010733
    VACUUM REUSABLE DRY FILTER3PK W/RING
  • SKU: 9052600
    VACUUM FOAM SLEEVE LG 2PK
  • SKU: 9058533
    VACUUM FOAM SLEEVE MD 3PK
  • SKU: 9052500
    VACUUM FOAM SLEEVE 3PK
  • SKU: 9196433
    VACUUM CLEANER BAGS 2PK 4GAL
  • SKU: 9066133
    VACUUM CLEANER BAGS 3PK 5-8.5GAL
  • SKU: 9066733
    VACUUM CLEANER BAGS 3PK 1-1.5GAL
  • SKU: 9303511
    VACUUM 2.5 GALLON 2.5HP WET/DRY

    VACUUM 2.5 GALLON 2.5HP WET/DRY

    Features
    3 in 1 Wet/Dry use/Blower
    Compact design & lightweight
    Wall mountable
    Tool holder
    Accessory Dia1.25?/32mm x 4ft/1.2m hose
    7ft/2.1m power cord
    Gulper nozzle
    Crevice tool
    Dust bag
    Foam sleeve
    Small cartridge filter
    Wall mount bracket
    Inner Pack 1
    Case Pack 1

  • SKU: 2021005
    VACUUM 1 GALLON 1.0HP WET/DRY

    VACUUM 1 GALLON 1.0HP WET/DRY

    Features
    2 in 1 Wet and Dry use
    Compact design & Lightweight
    Wall mountable
    Accessory
    Dia1.25?/32mm x 3.5ft/1.06m hose
    7ft/2.1m power cord
    Gulper nozzle
    Crevice tool
    Dust bag
    Foam sleeve
    Wall mount bracket
    Inner Pack 1
    Case Pack 1

  • SKU: 26513
    DRILL BRUSH SET 3PC HD

    DRILL BRUSH SET 3PC HD

    Automotive Drill Brush Set is ideal for all your automotive cleaning needs. Set includes 3 different brush sizes, each suited for different cleaning applications. The 2″ brush is great for spot cleaning and detailing. The 4″ brush is built for flat surfaces, and the 3-1/2″ dome brush’s bullet-shaped design can hit the corners of car-seats and rims.

    • Includes (3) Brush Sizes: 2″ Spot Cleaning Brush, 4″ Surface Brush and 3-1/2″ Dome Brush

    Inner Pack 4

    Case Pack 16

  • SKU: 26036
    BEAD LIFTING TOOL 3PCS SET

    BEAD LIFTING TOOL 3PCS SET

    The OEMTOOLS 26036 20″ Bead Lifting Tool 3 Pack provides the leverage needed when removing and installing tires. The pry bar features a spoon lever design that engages perfectly with the tire’s bead for effective bead lifting. Use either stand-alone or in conjunction with a tire changer for optimal results. The tool’s heat treated I-beam design provides the durability necessary for the job.
    20″ Length provides the leverage necessary for the job
    Heat treated for increased strength and durability
    Chrome Plated for corrosion protection
    Rounded edges to help prevent pinching tubes and damaging tires
    For use with any make of tire changer
    Perfect for mounting and dismounting tires on passenger vehicles, golf cart, motorcycle, shop equipment, etc.
    Includes 3 Tire Irons

  • SKU: 24862
    OIL DRAINER & FLUID EXTRACTOR 21GAL

    OIL DRAINER & FLUID EXTRACTOR 21GAL

    The OEMTOOLS 21 Gallon Oil Drain Vacuum and Extractor is designed for the collection of used fluids including motor oil, transmission fluid, and coolant from under lift-mounted vehicles, or by evacuation directly from fluid reservoirs or through dipstick tubes. The portable oil drain system is designed to safely capture oil and other vehicle fluids with the use of a large funnel or vacuum.
    Discharge Hose Length: 82″
    Funnel Diameter: 15″
    Funnel Extension Adapter: 22″
    Funnel Height Adjustment: 45″ – 62″
    External Air supply is Required
    Includes 4 Extraction Tubes: 3/8″ x 400 mm, 6 mm x 760 mm, 7 mm x 900 mm, 6 mm x 600 mm

  • SKU: 25071
    REAR DISC BRAKE PISTON CUBE

    REAR DISC BRAKE PISTON CUBE

    The OEMTOOLS Rear Disc Brake Piston is a must for replacing most rear disc brakes. It rotates pistons back into brake calipers when changing brake pads. A unique “cube” design provides five drive pin configurations to fit most applications.
    For Use with 3/8″ Drive Tool
    Rotates and Depresses Caliper Pistons Back into Caliper When Changing Brake Pads
    Unique Cube Design Provides 5 Drive Pin Configurations to Fit Most Applications
    Helps Remove and Install Disc Brake Pistons
    Re-aligns Piston Slots (Where aApplicable) to Back of Brake Pad

  • SKU: 27212
    MANUAL BUSHING INSTALLATION & REMOVAL SET

    MANUAL BUSHING INSTALLATION & REMOVAL SET

    Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals. Allows the technician to service a wide range of bushings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, etc.
    Reduces the Possibility of Damaging the Bearing/Suspension Housings
    Supplied with 4 Stepped End Plates and 4 Force Screws in Carry-Case
    Plates and Sleeves Can Also Be Used in a Standard Workshop Press When On-Site Access is Not Possible
    Comes with 20 Cups and Receivers for 100s of Combinations
    Sleeve Wall Thickness: 5 mm; Sleeve Height: 94 mm
    External Sleeve Diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm
    Sleeve End Caps: 83 x 20 mm
    4 ACME Threaded Forcing Screws: 10 X 1.5, 12 X 2.0, 14 X 2.0, 16 X 2.5 mm
    Force Screw Length: 450 mm
    Includes Adapter to Use Bushings with Shop Press

  • SKU: 25246
    RATCHETING  HOSE CLAMP PLIER

    RATCHETING HOSE CLAMP PLIER

    The OEMTOOLS Hose Clamp Pliers will remove and install flat band spring style hose clamps with diameters of 11/16″ to 2-1/2″ (18 mm – 63.5 mm). The extra reach and locking feature frees hands for faster and easier jobs. Flexible cable design for access to difficult to reach clamps.
    Flexible Cable Design for Access to Difficult to Reach Clamps
    Multi Position Lock Hold Clamps Open for Hands Free Operation
    Engineered For Maximum Strength

  • SKU: 25238
    BRAKE SPOON IMPORT

    BRAKE SPOON IMPORT

    The OEMTOOLS brake adjusting tool adjusts the ratcheting mechanism through the slot in the backing plate on conventional brake shoe fitted vehicles. It allows you adjust brakes without removing the drum or even the wheel. This precision-made tool works well on most imported vehicles and improve responsiveness of brakes if the self-adjuster no longer functions due to dirt or rust. Its compact design makes it perfect for working in tight spaces. Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion
    Adjust Brakes without Removing the Drum or Wheel
    Works Well on Imported Cars
    Compact Design Makes it Perfect for Working in Tight Spaces
    Manufactured using high carbon steel and chrome vanadium steel for strength, durability and resistance to corrosion

  • SKU: 25202
    BALL JOINT SEPERATOR

    BALL JOINT SEPERATOR

    The OEMTOOLS Ball Joint Separator features heat-treated heavy duty alloy steel and tapered fork wedge ends with 15/16″ opening. A long knurled handle provides positive grip.
    Heat-Treated, Heavy Duty Alloy Steel
    Tapered Fork End Has a 15/16″ Opening
    Knurled Handle
    Zinc Plated

  • SKU: 24481
    IMPACT WRENCH CORDLESS 20V LITH-ION

    IMPACT WRENCH CORDLESS 20V LITH-ION

    Heavy Duty 1/2″ Drive Li-ion Impact Wrench is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance and other applications. Rubber, ergonomic grip adds comfort and reduces fatigue. The 20V Max.* Li-ion battery gives you more torque power and longer battery life.
    Anvil: 1/2″ Drive
    2 Speed Transmission: 0-2200 RPM and 0-2900 IPM
    Nut Busting Torque: 300 Ft/Lb.
    Tightening Torque: 260 Ft/Lb.
    Includes 4.0 Ah Li-ion Rechargeable Battery with Charging Station
    Weight: 8 Lb.
    4 Battery Charge Indicators: 100% (4), 75% (3), 50% (2) and 25% (1)
    Includes Li-ion Battery with Charging Station
    Spare Battery Part Number: 27314A

Main Menu